Car Window Tint Shades - Universal Fit

 CAR WINDOW SUN SHADE FOR BABY AND KIDS ANY CAR MODEL

1000MM (WIDE) X 550MM (HIGH) REMOVEABLE VINLY

(OVERSIZED TO FIT ANY CAR MODEL REAR WINDOW & its VENT)

This product stops 60% of the suns glare and covers the whole window stopping the suns glare from creeping in and hurting your child’s eyes like other products.

It is made from block out material that has little holes in it.

After use just peel to remove no mess on the window.

From outside the window will just look darker as the back sticky side is black but from inside your child will see a world of printed colour imagination and protected from the strength of the suns glare.

After application the window can be wound down.

You will need: Pencil and scissors

How to apply:

1. Wash the INSIDE window.
2. If you have a vent window.

Cut the vinyl roughly so each piece comfortably covers the windows.

3. With the window closed peel the backing paper off.

Roughly place the black side of the vinyl on the INSIDE window and keep the design visually straight. So from the centre out start to rub it down.

If you have a crease you can peel it back from an edge a bit and rub the crease out from the centre. Rub the vinyl to the very edges of the window.

4. Then with a pencil lightly trace the shape of the window onto the vinyl.

Be sure not to trace to hard as you can break thought the vinyl.

5. Once happy peel back one edge at a time (do the top last) and cut the pencil line with a scissors (for an expert result cut 4mm out from the pencil line) then rub back down and took the vinyl under the edges with a plastic card.

To do the top wind down.